A shiny-opaque effect
Kristalium is a prestigious decorative finish for interior use. It is characterised by an extraordinary brilliance deriving from small precious crystals and opaque micro-pigments, which result in a singular shiny-opaque effect. It is a water-based and non-flammable product.
It’s extremely washable and can be coloured in any color.
1 L. and 2,5 L. buckets.
6-8 sq.m. per liter. depending on the finish
Special acrylic emulsion, crystalline-effect pigments, natural and synthetic mica, organic and inorganic opaque pigments, additives.
This is a water-based acrylic finish for interiors with premium, high-quality glitter and fine glass granules that randomly accumulate to give off special decorative effects.
Applied with a spalter or by spraying it, it can be colored in any color. It becomes completely washable two weeks after the application.
It is a non-toxic material, with a VOC index < 29.42 g / l – (L / A 200g / l (2010).
It can be used in cycles with Universal Primer and Breathable Paint.
The background must be smooth. So if the wall is new make sure it is uniform and apply our Quartz Primer. On an old wall, we recommend removing all solid paint and applying Primer Normal diluted with water 1 to 10. Then apply the plaster until the surface is perfectly smooth and apply Quartz Primer.
Note: Quartz Primer can be applied in natural white or in a color of a slightly lighter tone than the final Kristalium color.
Application: by brush or spray.
Apply the undiluted product with a brush or spalter, with short brush strokes starting from one point, then spreading it out in all directions. After applying it to an area of approximately 1 square meter, wipe the decorated surface with a dry brush, brushing the surface with strokes going in all directions. This helps to increase the decorative effect. After about 5 to 6 hours at 20 °C, you can apply the second coat in the same way, paying careful attention to go over the small accumulations of the minute glassy sand in an orderly manner. This gives the finish its unique aesthetic effect. After about 20 minutes, press the surface with a stainless steel spatula. This allows the glitter to spread out evenly at surface level, thus increasing the softness of the surface and the glitter effect.
Kristalium can also be applied by spraying it.